Real Southern Utah project · Infill restoration

4,600 pounds of infill. More than 4,600 square feet. One carefully rebuilt finish.

This large property needed more than a surface clean. ClearTurf worked through the turf system, installed approximately 4,600 pounds of fresh infill and rebloomed the fibers into the full, even finish the homeowner wanted.

4,600+square feet of turf
≈4,600 lb.fresh infill installed
2 daysof detailed field work
Large Southern Utah artificial turf property after ClearTurf infill installation and reblooming
Actual ClearTurf Care work · Daylight finished view

“Better than new.”

Lisa M. · homeowner

Why this scope made sense

Cleaning alone could not replace the missing support beneath the fibers.

The turf covered a large, highly visible outdoor living space, but the infill level and fiber presentation were not delivering the finish the property deserved. After inspecting the system, we built a fuller restoration scope rather than pretending grooming alone would solve it.

The work combined deep preparation, infill replenishment, mechanical distribution and detailed reblooming. Odor hot spots also received targeted treatment, followed by a return visit to verify and strengthen the result where needed.

Matched project views

Look beyond color—the fibers carry the real story.

Different sunlight changes how green turf appears in a photograph. The more useful comparison is fiber lift, density, evenness and how consistently the surface presents from edge to edge. Click any photo to inspect it full size.

Before
After
The full propertyThe wide view shows the change in density, fiber presentation and visual consistency after fresh infill was installed and the turf was carefully rebloomed.
Before
After
The side runThe narrower side area received the same whole-system attention, creating better fiber support and a more even finished appearance around the landscape features.

What the project required

A large installation still succeeds one deliberate pass at a time.

The exact process changes with turf condition, infill depth, pet use and access. These were the core phases of this project.

01 · Prepare

Clear and assess

Remove accessible debris, identify low-infill areas and evaluate traffic, pet-use and presentation concerns.

02 · Reset

Open the fibers

Use mechanical grooming to lift matted turf and create space for infill to reach the system instead of sitting on top.

03 · Install

Distribute fresh infill

Install approximately 4,600 pounds across the property, then work it through the fibers with attention to depth and coverage.

04 · Finish

Rebloom and detail

Complete final grooming, edge work and a daylight quality check so the finished result reads consistently across the yard.

Clean Turf, Clear Choice!

If your turf looks tired, do not assume replacement is the only answer.

Send photos or request an on-site assessment. We will explain whether the responsible next step is cleaning, restoration, fresh infill—or leaving the turf alone.